Hey guys,I am doing some experiments on double-sided PCBs. The main problem I am stuck in is that we need a signal to jump from one side to another. So, we create a via in Eagle that will be a hole…Continue
If you are already working with smd components, may I suggest you to use a smd 0 ohm resistor that bridges the wiring?
And may I suggest to you a link for a low cost PCB layout services? They do the layout(if you want…"
Develop the PCB in both side, while etching process, u have to use copper siding process in hole.. so that copper connects through hole that connects both side easily... also u can say its copper plating process...."
"I've done this by using a 1/64" tip and placing the tip in the hole from the board bottom and feeding the solder from the top. As I pulled the soldering tip out of the hole, the melted solder extrudes to the board bottom, leaving a…"
This is a simple tutorial on how to use a SD card with Arduino. On this tutorial, we used the Breakout Board for SD-MMC Cards from SparkFun.First, get a SD Card, put in your computer and create a text file named "test.txt" in the card root.Get your protoboard and connect…See More